Extra low pressure elements KCH 8040-C (F)

Ámbito de aplicación

Tap and low mineralized water up to 1 g/l

Modelo	A, mm	B, mm	B' (ATD), mm	C, mm	D, mm	Peso, kg
KCH 8040-C	1016.00	203.00	200.10	28.60	0.00	16.50
KCH 8040-F	1016.00	203.00	200.10	28.60	0.00	16.50
KCH 8040-C3	1016.00	203.00	200.10	28.60	0.00	17.50
KCH 8040-F3	1016.00	203.00	200.10	28.60	0.00	17.50

Descripción del producto

Características	Reinforced by glass fiber (-C) or tape (-F)
Material de la membrana	Composite polyamide
Tipo de la membrana	ОРМ33К
Diseño	Spiral wound
Función	Desalination of brackish water

Especificación

Modelo	Productividad, GPD	Selectividad, %	Área		Generador de vórtices
Modelo	Productividad, GPD	Selectividad, %	m²	ft²	mm	mil
KCH 8040-C	12 400	99.10 / 98.30	41.00	440.00	0.66	26.00
KCH 8040-F	12 400	99.10 / 98.30	41.00	440.00	0.66	26.00
KCH 8040-C3	10 500	99.10 / 98.30	35.00	375.00	0.86	34.00
KCH 8040-F3	10 500	99.10 / 98.30	35.00	375.00	0.86	34.00

TEST CONDITIONS: test solution of NaCl 500 mg/l, P=0,69 MPa, T=25°C , pH=7,5. Recovery - 15%

Nominal rejection is reached after 48 hours of continuous operation on test solution.

Minimal rejection of a new element after 20 minutes test on test solution.

Condiciones de funcionamiento y datos técnicos para el diseño

1) During continuous work with pH over 10,5 the temperature must not exceed 35°С 2) Flow of each element in a batch may vary +/-15% *In case of chemical cleaning with a solution pH exceeding 11,5 or at the temperature level more than 45°С please contact original manufacturer for consultation.